Hard-to-find, EOL, and shortage parts24h target RFQ responseInspection, traceability, and alternate sourcing
M

Monolithic Power Systems Inc.

📍 Kirkland, Washington, USA📅 Est. 1997🔗 Official Site →

Monolithic Power Systems (MPS) designs high-performance, integrated power management solutions. MPS's simple and innovative single-chip designs are used across automotive, industrial, cloud computing, telecom, and consumer electronics. Known for best-in-class efficiency, small footprint, and ease of use.

4.270
Total Parts
4.146
In Stock
29
Categories
4.160
Active
105
EOL/Obsolete

Key Product Lines

DC-DC ConvertersLED DriversMotor DriversBattery ManagementPower ModulesAutomotive Power

✅ Why Source Monolithic Power Systems Inc. from FPGACenter

MPS power management ICs available. FPGACenter sources genuine MPS parts for telecom and automotive power applications.

✓ Originality review✓ No Minimum Order✓ Quality Inspection✓ Global Shipping

Monolithic Power Systems Inc. Product Categories

DC-DC Switching Regulators (1841)LED Drivers (534)Linear Regulators (LDO) (378)Power Distribution Switches (253)Motor Drivers & Controllers (210)AC-DC Converters & Offline Switchers (206)Battery Chargers (162)Gate Drivers (89)Power Supply Controllers & Monitors (79)Special Purpose ICs (78)Audio Amplifiers (62)Full & Half-Bridge Drivers (55)DC-DC Switching Controllers (43)Supervisors & Reset ICs (40)Specialized Power Management (39)Op Amps & Instrumentation Amplifiers (36)Linear & Switching Controllers (30)Battery Management ICs (25)PFC Controllers (22)PoE Controllers (20)OR Controllers & Ideal Diodes (19)Hot Swap Controllers (17)Lighting & Ballast Controllers (11)Analog Switches & Multiplexers (8)Current Regulation & Management (6)Specialized ICs (3)Analog Switches - Special Purpose (2)Voltage References (1)Linear Regulator Controllers (1)

All Monolithic Power Systems Inc. Products

Page 59 of 214
Part NumberCategoryDescriptionPackageStockPriceStatus
MP2489DQ-LF-ZLED DriversThe MP2489DQ-LF-Z is an LED driver IC manufactured by Monolithic Power Systems Inc.. Technical highlights include -40°C ~ 125°C (TJ) operating temperature; design review should confirm drive current, MOSFET or LED load compatibility, input voltage, package fit, and operating temperature limits. This Surface Mount component is supplied in a 6-VDFN Exposed Pad package and is rated for operation across -40°C ~ 125°C (TJ). Designed for motor control, LED lighting, and display backlight applications, the MP2489DQ-LF-Z is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.6-VDFN Exposed Pad7.200 In Stock$1.22ACTIVERFQ
MP2490DQ-LF-PDC-DC Switching RegulatorsThe MP2490DQ-LF-P is a DC-DC converter manufactured by Monolithic Power Systems Inc.. Technical highlights include -40°C ~ 85°C (TA) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This Surface Mount component is supplied in a 10-VFDFN Exposed Pad package and is rated for operation across -40°C ~ 85°C (TA). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2490DQ-LF-P is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.10-VFDFN Exposed Pad3.540 In Stock$3.57ACTIVERFQ
MP2490DQ-LF-ZDC-DC Switching RegulatorsThe MP2490DQ-LF-Z is a DC-DC converter manufactured by Monolithic Power Systems Inc.. Technical highlights include -40°C ~ 85°C (TA) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This Surface Mount component is supplied in a 10-VFDFN Exposed Pad package and is rated for operation across -40°C ~ 85°C (TA). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2490DQ-LF-Z is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.10-VFDFN Exposed Pad6.403 In Stock$3.65ACTIVERFQ
MP2490DS-LFDC-DC Switching RegulatorsThe MP2490DS-LF is a DC-DC converter manufactured by Monolithic Power Systems Inc.. Technical highlights include -40°C ~ 85°C (TA) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This Surface Mount component is supplied in a 8-SOIC (0.154", 3.90mm Width) package and is rated for operation across -40°C ~ 85°C (TA). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2490DS-LF is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.8-SOIC (0.154", 3.90mm Width)2.327 In StockRFQACTIVERFQ
MP2490DS-LF-PDC-DC Switching RegulatorsThe MP2490DS-LF-P is a DC-DC converter manufactured by Monolithic Power Systems Inc., part of the MP series. Technical highlights include -40°C ~ 85°C (TA) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This Surface Mount component is supplied in a 8-SOIC (0.154", 3.90mm Width) package and is rated for operation across -40°C ~ 85°C (TA). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2490DS-LF-P is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.8-SOIC (0.154", 3.90mm Width)790 In Stock$3.94ACTIVERFQ
MP2490DS-LF-ZDC-DC Switching RegulatorsThe MP2490DS-LF-Z is a DC-DC converter manufactured by Monolithic Power Systems Inc.. Technical highlights include -40°C ~ 85°C (TA) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This Surface Mount component is supplied in a 8-SOIC (0.154", 3.90mm Width) package and is rated for operation across -40°C ~ 85°C (TA). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2490DS-LF-Z is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.8-SOIC (0.154", 3.90mm Width)7.398 In Stock$2.56ACTIVERFQ
MP2491CGQB-PDC-DC Switching RegulatorsThe MP2491CGQB-P is a DC-DC converter manufactured by Monolithic Power Systems Inc., part of the MP series. Technical highlights include -40°C ~ 125°C (TJ) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This standard mount component is supplied in a 13-PowerVQFN package and is rated for operation across -40°C ~ 125°C (TJ). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2491CGQB-P is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.13-PowerVQFN1.767 In Stock$3.99ACTIVERFQ
MP2491CGQB-ZDC-DC Switching RegulatorsThe MP2491CGQB-Z is a DC-DC converter manufactured by Monolithic Power Systems Inc.. Technical highlights include -40°C ~ 125°C (TJ) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This Surface Mount component is supplied in a 13-PowerVFQFN package and is rated for operation across -40°C ~ 125°C (TJ). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2491CGQB-Z is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.13-PowerVFQFN12.798 In Stock$2.48ACTIVERFQ
MP2491NGQB-PDC-DC Switching RegulatorsThe MP2491NGQB-P is a DC-DC converter manufactured by Monolithic Power Systems Inc.. Technical highlights include -40°C ~ 125°C (TJ) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This standard mount component is supplied in a 13-PowerVFQFN package and is rated for operation across -40°C ~ 125°C (TJ). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2491NGQB-P is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.13-PowerVFQFN5.220 In Stock$3.65ACTIVERFQ
MP2491NGQB-ZDC-DC Switching RegulatorsThe MP2491NGQB-Z is a DC-DC converter manufactured by Monolithic Power Systems Inc.. Technical highlights include -40°C ~ 125°C (TJ) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This Surface Mount component is supplied in a 13-PowerVFQFN package and is rated for operation across -40°C ~ 125°C (TJ). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2491NGQB-Z is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.13-PowerVFQFN1.728 In Stock$4.10ACTIVERFQ
MP2492DN-LFDC-DC Switching RegulatorsThe MP2492DN-LF is a DC-DC converter manufactured by Monolithic Power Systems Inc.. Technical highlights include -40°C ~ 85°C (TA) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This Surface Mount component is supplied in a 8-SOIC (0.154", 3.90mm Width) Exposed Pad package and is rated for operation across -40°C ~ 85°C (TA). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2492DN-LF is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.8-SOIC (0.154", 3.90mm Width) Exposed Pad1.291 In StockRFQACTIVERFQ
MP2492DN-LF-PDC-DC Switching RegulatorsThe MP2492DN-LF-P is a DC-DC converter manufactured by Monolithic Power Systems Inc., part of the MP series. Technical highlights include -40°C ~ 125°C (TJ) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This standard mount component is supplied in a 8-SOIC (0.154, 3.90mm Width) Exposed Pad package and is rated for operation across -40°C ~ 125°C (TJ). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2492DN-LF-P is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.8-SOIC (0.154, 3.90mm Width) Exposed Pad1.506 In Stock$4.40ACTIVERFQ
MP2492DN-LF-ZDC-DC Switching RegulatorsThe MP2492DN-LF-Z is a DC-DC converter manufactured by Monolithic Power Systems Inc.. Technical highlights include -40°C ~ 85°C (TA) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This Surface Mount component is supplied in a 8-SOIC (0.154", 3.90mm Width) Exposed Pad package and is rated for operation across -40°C ~ 85°C (TA). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2492DN-LF-Z is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.8-SOIC (0.154", 3.90mm Width) Exposed Pad5.916 In Stock$4.05ACTIVERFQ
MP2492DQ-LF-PDC-DC Switching RegulatorsThe MP2492DQ-LF-P is a DC-DC converter manufactured by Monolithic Power Systems Inc.. Technical highlights include -40°C ~ 85°C (TA) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This Surface Mount component is supplied in a 10-VFDFN Exposed Pad package and is rated for operation across -40°C ~ 85°C (TA). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2492DQ-LF-P is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.10-VFDFN Exposed Pad726 In Stock$9.88ACTIVERFQ
MP2492DQ-LF-ZDC-DC Switching RegulatorsThe MP2492DQ-LF-Z is a DC-DC converter manufactured by Monolithic Power Systems Inc.. Technical highlights include -40°C ~ 85°C (TA) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This Surface Mount component is supplied in a 10-VFDFN Exposed Pad package and is rated for operation across -40°C ~ 85°C (TA). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2492DQ-LF-Z is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.10-VFDFN Exposed Pad1.732 In Stock$5.65ACTIVERFQ
MP2493DN-LFDC-DC Switching RegulatorsThe MP2493DN-LF is a DC-DC converter manufactured by Monolithic Power Systems Inc.. Technical highlights include -40°C ~ 85°C (TA) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This Surface Mount component is supplied in a 8-SOIC (0.154", 3.90mm Width) Exposed Pad package and is rated for operation across -40°C ~ 85°C (TA). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2493DN-LF is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.8-SOIC (0.154", 3.90mm Width) Exposed Pad13.598 In Stock$3.22ACTIVERFQ
MP2493DN-LF-PDC-DC Switching RegulatorsThe MP2493DN-LF-P is a DC-DC converter manufactured by Monolithic Power Systems Inc., part of the MP series. Technical highlights include -40°C ~ 85°C (TA) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This standard mount component is supplied in a 8-SOIC (0.154, 3.90mm Width) Exposed Pad package and is rated for operation across -40°C ~ 85°C (TA). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2493DN-LF-P is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.8-SOIC (0.154, 3.90mm Width) Exposed Pad2.181 In Stock$4.13ACTIVERFQ
MP2493DN-LF-ZDC-DC Switching RegulatorsThe MP2493DN-LF-Z is a DC-DC converter manufactured by Monolithic Power Systems Inc.. Technical highlights include -40°C ~ 85°C (TA) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This Surface Mount component is supplied in a 8-SOIC (0.154", 3.90mm Width) Exposed Pad package and is rated for operation across -40°C ~ 85°C (TA). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2493DN-LF-Z is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.8-SOIC (0.154", 3.90mm Width) Exposed Pad1.696 In Stock$5.44ACTIVERFQ
MP2493DS-LFDC-DC Switching RegulatorsThe MP2493DS-LF is a DC-DC converter manufactured by Monolithic Power Systems Inc.. Technical highlights include -40°C ~ 85°C (TA) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This Surface Mount component is supplied in a 8-SOIC (0.154", 3.90mm Width) package and is rated for operation across -40°C ~ 85°C (TA). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2493DS-LF is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.8-SOIC (0.154", 3.90mm Width)1.915 In StockRFQACTIVERFQ
MP2493DS-LF-PDC-DC Switching RegulatorsThe MP2493DS-LF-P is a DC-DC converter manufactured by Monolithic Power Systems Inc., part of the MP series. Technical highlights include -40°C ~ 85°C (TA) operating temperature; design review should confirm input voltage, output voltage, load current, buck or boost topology when applicable, and thermal operating temperature limits. This standard mount component is supplied in a 8-SOIC (0.154, 3.90mm Width) package and is rated for operation across -40°C ~ 85°C (TA). Designed for battery-powered devices, portable electronics, and industrial sensors applications, the MP2493DS-LF-P is currently in active production through Monolithic Power Systems Inc.'s standard distribution channels.8-SOIC (0.154, 3.90mm Width)2.779 In Stock$4.47ACTIVERFQ

Frequently Asked Questions

Where can I buy Monolithic Power Systems Inc. electronic components?

FPGACenter stocks 4.270 Monolithic Power Systems Inc. part numbers with 4.146 currently in stock. All parts are 100% original with full traceability. No minimum order quantity required. Submit an RFQ for competitive pricing.

Can I still get obsolete Monolithic Power Systems Inc. parts?

Yes. FPGACenter specializes in sourcing hard-to-find and obsolete components. We have 105 end-of-life/obsolete Monolithic Power Systems Inc. part numbers in our database, many available from verified stock or through our global sourcing network.

What types of Monolithic Power Systems Inc. products does FPGACenter carry?

We stock Monolithic Power Systems Inc. products across 29 categories including DC-DC Converters, LED Drivers, Motor Drivers, Battery Management. Browse our full catalog or contact our sourcing team for any specific Monolithic Power Systems Inc. part number.

Need Monolithic Power Systems Inc. Components?

Submit an RFQ for competitive pricing on any Monolithic Power Systems Inc. part. No minimum order, fast global shipping.

Request QuoteContact Sales
Get Quote